New Portable No Harm Electric 4 in 1 Remote Control Small Medium Large Dog Training Shock Vibrate Collar Anti Bark
You are looking at a Remote Electric Dog Training Collar. It’s a 4 function [Instant Static Impulse + Static Impulse after Vibration (warning before static impulse) + 3 Level Whistle Signal + LED light] remote training collar. It’s an electronic dog training system with a working range up to 600 feet. This compact, easy operation system will control dogs’ behavior when they are taken out for a walk.
As we all know an out-of-control dog can be a danger to themselves and others. Training collars can help you achieve a well trained dog within days.
This collar is suitable for small and medium dogs.
– The strong static impulse can penetrate the hair of the pet and fabric within 6mm thickness. It is unnecessary to let the discharging point touch the skin of the pet. Therefore it is safe for the pet.
– The static impulse can quickly and effectively curb the improper deeds of the pet.the warning vibration will let the pet associate the vibration with the static impulse. In the end, vibration will achieve the same effect as the static impulse.
– Both the static impulse and warning functions are set with automatic stop. So this will not reprimand the pet continuously.
– With the vibration induction power switch in the collar receiver, the collar can be automatically turned on and turned off.
– Water Resistant Collar.
Length: 43mm Height: 68mm Width: 38mm
Collar length adjustable from 8 inches to 20 inches
Power:2* 1.5V AAA battery (not included)
Water Resistant and shockproof
Length: 120mm Height: 25mm Width: 45mm
Power: 9v 6F22 battery (not included)
LED signal light and illumination at night
The sound function for attracting attenion
1 x Remote control
1 x Receiver
2 x 0.6” electrodes (use for Long Hair)
2 x 0.4” electrodes (use for Short hair)
1 x Black Adjustable nylon strap collar
1 x test LED light
1 x manual
Matching Receiver and Transmitter
1.Turn on the transmitter by the switch on right side of it.
2.Install the batteries for the receiver.The LED inside the receiver starts to keep flashing.Press vibration or shock button immediately after batteries are put into the receiver firmly.Then the LED will stop flashing and only light which indicates that the transmitter and the receiver have matched each other successfully.
3.If LED stops flashing on its own without press any button in the transmitter,take out the batteries.Wait for at least 10 seconds and try step 2 again.
4.Put the cover on the receiver firmly
5.Attach the receiver to the collar.
Eliminate one misbehavior or teach one obedience command at a time.If you move too fast with the training,your pet may become confused.
Be consistent.Give your pet a tone or stimulation with each misbehavior.
Do not over-correct your pet.Use as few stimulations as possible to train your pet.
Unless you can supervise him,it is recommend that you restrict your pet from situations in which he has a history of misbehaving.However,setting up a situation as a training session can dramatically improve your chances of success.
If your pet reacts to the training by hiding or acting fearful,redirect his attention to a simple and appropriate behavior such as the “Sit”commend.