ANSTAR CAR Camera 4″ Video Recorder Dual lens Dash Cam Parking Assistance Full HD 1080p Car Dvr Vehicle camera Auto Dashcam DVRS
Programme: JL AC5201A
LCD Screen Size: 4 inch IPS high definition screen (16: 9) Camera: 12 million pixels Recording video format: AVI Video resolution: 1920 * 1080P 30FPS Photo Resolution: 3M – 1M Photo format: JPG Memory Card Type: TF card Memory card capacity: maximum support 32G USB Interface: USB2.0 5pin Power Interface: USB2.0 DC5V 1.5A Frequency: 50HZ / 60HZ Battery: 300mAh 3.7V lithium polymer battery G-senor: YES Motion detection: YES Microphone: YES Loop recording: YES Reverse image: YES Parking monitor: YES Motion detection: YES HDR: YES Night vision:YES Camera: Dual HD camera Front and rear dual recording: YES Angle: Front 160° wide angle,rear 140° Picture in picture:YES,4 kinds display mode Languages: English, Chinese (simplified), Chinese (Traditional), Japan… Weight: 900g Size: 115 * 65 * 35mm Package: Weight: 150g Gross Weight: 1025g Material: metal, leather decoration, metal lens frame Packing List: Car Dvr X1 Instructions x 1 Holder x 1 rear camera x 1 rear camera cable x 1 Cigarette lighter x 1
Self-help shopping Guide
Receive your order Waiting for payment Prepare your order Pack your order at Picked up by mail service
released by Aliexpress our warehouse
Out for delivery Depart your local Clear Customs Flown to destination country Processed through
post offic sort facility
Q: Why the battery can only work a short time after full charge or go into sleep mode when it not connect with charger?
A: Because DVR’s battery is designed to car power-off protection ,inside only have a very small space put for battery, most car DVR inside battery very small size.Normally you have to recharge the DVR with your car charger to make it working properly. If not in charge, it will go to sleep mode,it design to keep the power,in case some accident,then it will have power to record,it’s normal.
Q: How does the DVR get it to be initialized?
A:First look at the machine above there is no reset button, which is reset button. Or you can go to the system to find, generally have a restore factory settings options.
Q: How does the DVR set up automatic coverage?
1.The sensitivity of the gravity sensor to reduce, that is to say the trigger gravity acceleration is set to high, so that the vehicle only a large vibration to trigger the current record of this video can not be locked, to avoid The memory card is quickly filled.
2.The cycle of video files set the time shorter, generally 3 minutes, 5 minutes, 10 minutes can choose to set, it is recommended to set the shortest one, that is, 3 minutes. In this case, even if the gravity sensor to trigger, then the existence of this file can not be covered by the space will be smaller.
3.In the above two points on the basis of over time to format a memory card.
4.Turn off the gravity sensor G-sensor function,so don’t worry about the memory card is full, full will automatically cover.
Q: Why the rear camera not showing in DVR ?
A: Please try to reinsert the rear camera’s line,check interface,and check if the Positive and negative connect wrong,the red cable connect to Positive,the black connect to negative,and reboot car camera.
Q: Why the DVR restart after the shutdown interface?
A:first please check the AB line is good contact, and check whether the power cord is connected to see whether the external power supply is more than 12V, the current can maintain more than 12V. Any of the above is not satisfied will cause this phenomenon.