Aosong Robot Technology Co. Ltd. launched simulation of piezoelectric ceramic vibration sensor, this product is to useThe reverse process of the vibration of the piezoelectric ceramic to the electrical signalThe electrical signal is generated when the piezoelectric ceramic sheet is shocked.Combined with the use of Arduino analog port can sense weak vibration signal, can be achieved with the vibration of interactive works, such as electronic drum interactive works. AndThis section product data interface with anti anti plug plug, on both sides of the interface were letter & ldquo; A” represents the type of signal to an analog signal, and & ldquo; vibration & rdquo; logo represents a module type, ad hoc 4 m3 fixed mounting holes, adjust direction and fixing is convenient and easy to use, beautiful appearance.
Simulation of piezoelectric ceramic vibration sensor
Ad hoc 4 M3 fixed mounting holes, the adjustment of the direction and the fixed easy to use, beautiful and generous
The analog voltage ceramic vibration sensor in accordance with the program access UNO Arduino controller analog port A0, observed when the vibration level is not at the same time, the output value of the serial port, can be achieved with the vibration of the interactive works.
Products in kind with the general size of the coin is easy to use
1 working voltage: 3.3V or 5V
2 working current: 1mA; <
3 temperature range: of-10 DEG C 70 C
4 interface type: analog signal output
5 size: X 23mm 30mm
6 weight: 5g
7 pin definition: S signal output, + power supply (VCC), – ground (GND)
8.Input: positive electrode of piezoelectric ceramic
9.Gnd: negative electrode of piezoelectric ceramic
Ceramic vibration sensor, perfect combination vibration detection system
The S port is connected to the controller’s analog input pin. 5V and GND are connected to the power supply of +5V and GND. Input and Gnd are connected to the positive and negative electrode of the piezoelectric ceramic sheet.